Why does it hit the steering wheel at speeds above 100 km / h?

Various breakdowns of the chassis or braking system can manifest themselves in the form of steering wheel beating at high speed. The car owner, as soon as he noticed such problems on his car, should perform a comprehensive diagnosis, determine the cause of the problems and repair the car in a timely manner. Let’s talk in more detail about why the steering wheel starts to beat and vibrate at a speed of more than 100 km / h and scrap car removal scarborough.

Wheel balancing problems
The most common causes of steering wobble at high speed are associated with improper wheel balancing. Moreover, such shocks on the steering wheel can manifest themselves only in a strictly defined range of speeds, and if the car accelerates to 120-130 km / h or more, such vibration on the steering wheel disappears. For prevention purposes, each time you change tires from winter to summer, check the rims and, if necessary, not only balance them, but also roll them out, eliminating existing defects.

If you ignore such malfunctions and operate a car with unbalanced wheels, then this can lead to rapid tread wear, and even new high-quality wheels will be destroyed literally in one season. Usually such a wheel balancing procedure has an affordable cost. Therefore, when replacing tires for winter and summer ones, you should not save on its implementation, remember that subsequently fixing suspension faults and changing recently purchased high-quality tires will cost much more than the driver could save on balancing tires.

Engine mountings worn
Another reason for the steering wheel beating at 100 km / h is engine mount wear. The engine mount may not compensate for vibrations, especially when the vehicle is accelerating, which leads to noticeable steering wheel beating at high speeds. It is possible to determine such malfunctions by examining the engine compartment, where it will be seen that the engine seems to have fallen on one side. In such a case, the repair involves replacing the worn out engine mountings, which allows to completely solve the problems with the steering wheel runout.

Damaged brake discs
Another common cause of such vibration on the steering wheel is thermal deformation of the brake discs, and the appearance of dross on them. Moreover, such shocks can occur at different speeds, the driver needs to contact the service as soon as possible, since it is extremely dangerous to operate a car with malfunctions in the brake system. This can occur in cases where the car has stood still for a long time, as a result, the brake pads are burnt to the discs, therefore, shocks are noted that can be transmitted to the steering column or pedal assembly.

Let’s sum up
If there are distinct bumps on the steering wheel at a speed of about 100 kilometers per hour, it is necessary to contact the service as soon as possible, carry out a comprehensive diagnosis of the car and determine the existing malfunctions. The longer the car owner does not apply to the service, the more difficult and more expensive it will cost him to repair the car in the future. Out-of-balance tires, worn out engine mountings and problems with brake discs are the main causes of these high speed steering bumps. Remember that it is undesirable to operate a car with such malfunctions, the sooner the car owner contacts the service, the easier it is to eliminate the existing breakdowns.

admin

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top